Reference Video: https://www.youtube.com/watch?v=U4rfs27744oManufacturer's Note:
Material: Steel molded racing steel joints (warm reminder: racing steel joints cannot be painted, the color will fade easily), non-original joints
Joint tightness: average, not particularly tight, and the horizontal rotation position is loose. If you hold the doll in your hand after attaching the arms, the hand will easily swing left and right, so it can only be used by customers with low requirements. Or you can tighten the loose position yourself.
Replacement method installation steps:
1: Just install it directly. If you find it difficult to install the lower arm, you can heat the lower arm to soften it before installing it (using a hot air cylinder or hot water soaking method). Because OOO needs to change into beastly equipment, it is very difficult. Easy to disassemble and assemble.
Friends who don’t distinguish between left and right. You can look at the letters R and L on the joints, R stands for right and L stands for left.
Important note: When installing the "Latorartar Combo", be sure to apply some lubricating oil or Vaseline on the upper mounting post before installation, because the upper end of the original Latorartar Combo is small enough. If it is installed directly without lubricating oil, it will rotate horizontally. It is difficult to turn and there is a chance that the shoulder joint may become stuck and unable to move. Therefore, you need to add lubricating oil. After adding lubricating oil, turn it left and right and put it on with some force.